Antislip timber decking for commercial applications | Marley Eternit Decking

Marley Eternit Antislip Plus®

High performance commerically popular antislip timber decking

  • Full FSC and PEFC chain of custody 
  • Exceeds HSL slip testing guidelines to BS 7976 
  • Minimum pendulum test value for low slip is 36, Marley Eternit Antislip Plus® ranges from 63-78 (depending wet or dry)
  • Strength graded to C16 or C24
  • BS 5268 and Eurocode span tables 
  • Treated to either Use Class 3 (MicroPro®) or Use Class 4 (Naturewood®) as standard to a 30 year service life
  • Traditionally Decking appearance
  • TDCA DeckMark Plus approved
  • CE Marked
  • Produced from V Grade European Redwood

Marley Eternit Antislip Plus® was developed specifically to provide slip resistant exterior surface

Antislip Plus® timber decking boards have been specifically designed to provide a durable and effective external antislip surface to minimise any risk of slipping – even in adverse weather conditions.

Antislip Plus® can be supplied in both smooth or castellated profile. For all applications Marley Eternit recommend a smooth profile however the castellated profile is available when a traditional timber decking ‘look’ is required.

Antislip Plus® uses a unique formula of grey resin based aggregate inserts which are injected into the deck board grooves. If smooth boards are required, grooves are specially machined into the boards to receive the inserts.

Marley Eternit recommends the use of Antislip Plus® for all decking areas where there is public access or where there is an anticipated high level of pedestrian traffic.

For most uses two non slip inserts are appropriate, however there are instances where three inserts could be used, for example on a public walkway which crosses water. Other applications also include bridges, boardwalks, cycle and foot paths.

Antislip Plus® Colour

Pale Green, almost clear fading to a warm Honey colour before eventually turning Silver Grey.

Marley Eternit Antislip Plus® Coverage

  • 125mm widths: 8m per m²
  • 150mm widths: 6.7m per m²

Marley Eternit Antislip Plus® Grading

C16 and C24 available

Marley Eternit Antislip Plus® Available Treatment

  • MicroPro UC3
  • Naturewood UC4 and Highway Sector Scheme 4
  • Marley Eternit Classic pigment
  • Fire Retardant

Marley Eternit Antislip Plus® Installation

Marley Eternit recommends following the Timber Decking and Cladding association guidelines. The best practice guides can be found here.

Antislip Plus® Field cuts

All field cuts must be painted/ coated with a cut end preservative.

Common applications for Antislip Plus®

  • Boardwalks
  • Wetlands
  • Bridalways & Cyclepaths
  • Rural footpaths
  • Bridges
  • Marine environments

Ideally used for

  • High slip risk areas
  • Stairs & ramps
  • Conservation areas
  • Enhancing environmental credentials
  • High level of pedestrian traffic

What would you like a sample of:

Personal Details
Tell us about your project: